Vertical Arm Pipe Grapple Fork

Overview
Photos
Videos

Designed to safely handle large diameter pipe. Independent clamp arms release to a vertical position to allow easier approach to pipe stored in racks.

* Excellent operator visibility.
* Firm load control on uneven surfaces.
* Optional 3rd middle tine for handling pallets.
* Optional Poly – Surface covering for pipe protection.
* Pin-On or Coupler Equipped configurations available.

Third Function machine hydraulics required for operation. Jumper Hoses Included

Tech Specs

Third-function machine hydraulics required to operate hydraulic arms. Jumper Hoses Included.

Common Applications

Pallet/Truck Loading
Pipe Handling
Pole Handling

Fork Sizes and Capacities
Loader Size OEM Size Chart	Frame Width Inches	Tine Spread Inches	Tine Size Inches	Fork Weight U.S. Pounds	Max Pipe Outer Diameter Inches	Lift Capacity (A) U.S. Pounds
(A) Rating of tine capacity per pair at mid-tine load center. *Special order tines - lead times may vary. All weights are approximate. Weights are estimated assuming no add-ons, options or payloads.
30 / 50	108"	102"	2.5 x 6 x 66	5,100 lbs	28"	14,170 lbs
60	120"	116"	3 x 8 x 96	7,000 lbs	28"	35,000 lbs
70 / 80	132"	128"	3.5 x 8 x 96	8,000 lbs	46"	47,650 lbs

Options

Poly-Lining
Protect your attachment from corrosive materials such as fertilizer and animal waste with a durable, protective Poly-Liner. The Poly-Liner also serves as a non-stick surface that helps release "sticky" materials such as animal waste, clay, mud and kaolin soils, reducing material "carry back". The Poly-Liner material is formed to fit the contact surfaces of your attachment. The liner is secured by metal weld washers and support strips that prevent material from getting under the leading edges of the liner. Thickness of the liner varies depending on attachment size and service duty.
Third Middle Tine
The Vertical Arm Pipe Grapple Fork is designed with a wide frame for stability when handling wide payloads, but that doesn't mean you can't also use it to handle narrower loads as well. Simply order your fork with an optional third tine to enable it to handle narrower loads than the main arms would normally allow for. Width / horizontal positioning of the tine can be adjusted manually.