ACS Trash Grapple Buckets
These hard working trash grapple buckets are designed to re-handle light bulk materials up to 2,200 lbs. per square yard such as solid waste, refuse, leaves and brush ¹under normal conditions.
The grapple clamps are designed to allow the bucket to hold up to 50% more than rated capacity. Optional mesh grating is available for even greater material retention.
Drilled to accept ACS reversible bolt-on edges. Available in either pin-on or coupler-equipped configurations. Wheel loader requires third-function hydraulic circuit to actuate grapple cylinders. Attachment jumper hoses included.
ACS Trash Grapple Buckets Links
Tech Specs
Wheel loader requires third-function hydraulic circuit to actuate grapple cylinders. Attachment jumper hoses included.
¹A Trash Grapple Bucket is not suitable for handling material in a harsh environment. An example of a harsh environment would be frozen woodchips or scrap aluminum on a concrete surface.
Common Applications
Designed to re-handle light bulk materials up to 2,200 lbs. per square yard.- Baled Refuse Handling
- Debris Clean-Up
- Disaster Cleanup
- Land Clearing
- Road Maintenance
- Site Finishing
- Solid Waste Handling
- Utility Clean Up
| Bucket Capacity
Cubic Yards
|
Bucket Capacity With Grapple
Cubic Yards
|
Weight
US Pounds
|
|---|---|---|
| Bucket capacities reflect SAE heaped standards, however, additional capacity is provided when installing a bolt on edge (BOE). All weights are approximate. Weights are estimated assuming no add-ons, options or payloads. | ||
| 1.00 | 1.30 | 1,485 |
| 1.50 | 1.95 | 1,800 |
| 2.00 | 2.60 | 2,350 |
| 2.50 | 3.25 | 2,825 |
| 3.00 | 3.90 | 3,100 |
| 3.50 | 4.55 | 3,890 |
| 4.00 | 5.20 | 4,250 |
| 4.50 | 5.85 | 4,750 |
| 5.00 | 6.50 | 5,400 |
| 5.50 | 7.15 | 5,915 |
| 6.00 | 7.80 | 6,450 |
| 7.00 | 9.10 | 7,150 |
| 8.00 | 10.40 | 8,060 |
Options
-
Bolt-On Edge
Increase the lifespan of your bucket with a beveled, wear-resistant steel edge that takes the brunt of all first-contact impacts. Double-sided for twice extended life; when one side wears down, simply turn it around to expose the fresh edge. Weld-on AR 400 steel skid pads at bottom rear of bucket included. Factory painted and installed to match either ACS or OEM hole patterns.
-
Coupler Configurations
Get your attachment configured to be pinned directly to the loader arms, work with a coupler you already own or buy your attachment as a package with one of our rugged hydraulic coupler choices below.
-
Pro Series 2000
Our most advanced coupler design for the 4WD loader. The compact body balances strength with performance, keeping the payload close to the loader for the closest-in CG (center of gravity) in the industry. Features the ACS original single-point hookup design for fast, smooth coupling — even on uneven terrain.
-
Series 1000
Fully-supported legacy coupler system that established our reputation. Used in private and government fleets and highly regarded for its dependability — we still make it because you still demand it.
-
OEM Coupling Systems
ACS manufactures couplers compatible with all popular OEM coupler systems:
-
-
Mesh Grating
Add additional retention control for handling smaller, lighter material by adding steel mesh grating to your grapple frames.
-
Trash Grapple Bucket
Re-handling cardboard at a recycling plant.
-
Trash Grapple Bucket
Re-handling cardboard at a recycling plant. Shown with optional mesh screen.
-
Trash Grapple Bucket
-
Trash Grapple Bucket
-
Trash Grapple Bucket
